EGW Viper/Venom S&W Revolver Sight Mount

$49.95

Within 2 days

Brand: EGW

SKU: 49319

Compatibility:: S&W, S&W 52, S&W 60 3", S&W 99, S&W 327, S&W 340PD, S&W 457, S&W 460, S&W 500, S&W 500 4", S&W 610, S&W 627, S&W 686 4", S&W 686 6", S&W 900s, S&W 908, S&W 910, S&W 915, S&W 929, S&W 945, S&W 986, S&W 1854, S&W 2214, S&W 4000s, S&W 4506, S&W 4516, S&W 5900, S&W 5900s, S&W 5906, S&W 5946, S&W Bodyguard 2.0, S&W Bodyguard 38 Special, S&W Bodyguard 380, S&W CSX, S&W Chief Special, S&W Equalizer, S&W Governor, S&W Governor 2 3/4", S&W J Frame, S&W J Frame 2", S&W J Frame 2.25", S&W J Frame 2.125", S&W J Frame 3", S&W J Frame 36 2", S&W J Frame 36 3", S&W J Frame 60 2 1/8", S&W J Frame 60 3", S&W J Frame 317 3", S&W J Frame 337 3 1/8", S&W J Frame 442, S&W J Frame 640 Cent 2 1/8", S&W J Frame 642, S&W J Frame 649 Bodyguard 2", S&W J Frame Round Butt, S&W K/L Frame, S&W K Frame, S&W K Frame 2", S&W K Frame 2.5", S&W K Frame 3", S&W K Frame 4", S&W K Frame 6", S&W K Frame 10 2", S&W K Frame 10 4", S&W K Frame 19 2 1/2", S&W K Frame 19 4", S&W K Frame 66 2 1/2", S&W K Frame 66 4", S&W L Frame, S&W L Frame 2.5", S&W L Frame 3", S&W L Frame 4", S&W L Frame 586 4", S&W L Frame 686 4", S&W M&P, S&W M&P .22 Compact, S&W M&P 2.0 Compact 3.6" 9/40, S&W M&P 2.0 Compact 9/40 4", S&W M&P 5.0", S&W M&P 5.7X28, S&W M&P 9 4.25", S&W M&P 9 5'', S&W M&P 9 Compact, S&W M&P9 Competitor, S&W M&P 9 FS, S&W M&P 9 PRO 2.0, S&W M&P 9 PRO Series, S&W M&P9 Subcompact 3.6'', S&W M&P 9/40 4'', S&W M&P 9/40 M2.0 5", S&W M&P 9EZ, S&W M&P 15, S&W M&P 22, S&W M&P 22 Magnum, S&W M&P 40 4.25'', S&W M&P 40 5'', S&W M&P 40 Compact, S&W M&P 40 FS, S&W M&P 45 4.25'', S&W M&P 45 Compact, S&W M&P 45 FS, S&W M&P 380EZ, S&W M&P C.O.R.E M2.0, S&W M&P Compact, S&W M&P Core, S&W M&P FPC, S&W M&P M2.0, S&W M&P M2.0 3.6", S&W M&P M2.0 4" Compact, S&W M&P M2.0 9, S&W M&P M2.0 9/40 (4.25''), S&W M&P M2.0 9/40 FS, S&W M&P M2.0 40, S&W M&P M2.0 45, S&W M&P M2.0 45 (4.25''), S&W M&P M2.0 Compact, S&W M&P M2.0 Compact 9/40, S&W M&P OR Compact, S&W M&P OR FS, S&W M&P Shield, S&W M&P Shield 2.0 9/40, S&W M&P Shield 2.0 45, S&W M&P Shield 9, S&W M&P Shield 9 4", S&W M&P Shield 9EZ, S&W M&P Shield 40, S&W M&P Shield 40 4", S&W M&P Shield 40EZ, S&W M&P Shield 45, S&W M&P Shield 380EZ, S&W M&P Shield EZ 2.0, S&W M&P Shield EZ 30Super, S&W M&P Shield OR, S&W M&P Shield Performance Center, S&W M&P Shield Plus, S&W M&P Shield Plus 3.1'', S&W M&P Shield Plus 4'', S&W M&P Shield w/TLR6, S&W M29, S&W M629, S&W N Frame, S&W N Frame 2.5", S&W N Frame 3", S&W N Frame 4", S&W N Frame 8 3/8", S&W N Frame Round Butt, S&W SD9, S&W SD9 VE, S&W SD40, S&W SD40 VE, S&W Sigma, S&W Sigma "V", S&W Sigma FS, S&W X FR 460 w/8.375", S&W X FR 500 w/8.375", S&W Z Frame
Material:: Aluminum 7075

Description

Mounting Hardware is Included

This mount fits:
Smith & Wesson K Frame Revolvers
Smith & Wesson L Frame Revolvers
Smith & Wesson N Frame Revolvers
Smith & Wesson X Frame Revolvers

This mount is now updated to use 2 of the 3 holes on the top strap of the revolver. It does not use the front hole.

If your revolver is not drilled and tapped this mount will not work. The best way to verify that it is/is not drilled and tapped is to open the cylinder and check the rib underneath. There should be through holes that are drilled and tapped. If there are not (like the above image) this mount will not work without you having the gun drilled and tapped. You can have a competent and qualified gunsmith drill and tap the top strap with the standard S&W hole pattern which will allow you to use our mount.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in place of the rear sight
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights

The screws that are included with this mount require a 5/64'' allen wrench for installation.

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Torque Specs: 15 in/lbs

Mounting Hardware:
(2) 6-32 Button Head Screws
(2) 6-32 Flat Head Screws
(1) 6-48 Torx Head Screw

Red Dot Fitment:
Vortex Viper
Vortex Venom
Burris Fast Fire 1, 2, 3, 4
Docter
ADE RD3-001
ADE RD3-002
ADE RD3-009
UTG Reflex Micro Dot
Crimson Trace CTS-1200
Crimson Trace CTS-1300
Sightmark Mini Shot

The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.

*All ADE mounts require 6-32 x 3/8" screws.

Please note: We have found that some red dots commonly found on Amazon such as the UTG and ADE may not hold the same tolerances as the red dots that this mount was initially created to work with. These dots may not fit properly on the posts on the plate. We would recommend either sending the red dot back for an exchange to whichever seller you purchased it from, or open up the holes in the bottom of the red dot to accommodate the pins.

By purchasing EGW Viper/Venom S&W Revolver Sight Mount from our online store, you are guaranteed to receive a high-quality item. We work with trusted brands to offer shooting and hunting enthusiasts, both amateur and professional, quality products at a reasonable price. Choosing to buy from us means opting for quality and practicality

The actual appearance of the product may differ from the image on the website. For additional information about payment, delivery, and product specifications, please contact us by phone or email.